Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
I like to combine gold HSF with different regular laser-dark colors in one design.
What is the order to follow (what first,…), what temperature first (lowest or highest)? ………
Do I use 2 separate foils or can I do it with one foil (perhaps in several steps)?
Dear Brodarto,
If you want to combine you just have to press your design onto the shirt. But only for 5-10 seconds and with low pressure.
After you can place the HSF foils onto the desired areas and press again with the same heat but with high pressure and for 30 seconds.
Of course you can use different HSF foils at once.
Pell them after they cooled down.BR
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
