Hi Don

Do you have the colour mapping available on your transfer rip. It will be on the right hand side on top. Once you select your media it will show above the box on the right hand side. That is were you change the toners. You would select the white toner and drag it into the cyan position then select the cyan toner and drag it into the white position. You then save your settings. You do all this with your printer on. You then change the toner and drum complete from white position and put that in the cyan position and same with the cyan that will go into the white position. When you set your white as you will need to increase the coverage you would increase this on the printer for the cyan position. It works perfect and I do clear labels and it works a treat. I use this setting more on the printer then I use it for t-shirts and garment printing in its normal position.