[urbanmonkey]

Hi Bulut,

I’ve pasted the link for the videos of the entire process we’re following.
Request you to kindly have a look and advise how to resolve the issue.

Thanks!

[urbanmonkey]

Dear Bulut,

PFB the link for the process we’re following end to end:
https://drive.google.com/open?id=1KOPmyT9NiTIBNFTytgj6FnJUiee-3Axi

Also, PFB the link for the images of the final product output:
https://drive.google.com/open?id=1TC8HyMjYzOC-do-bpG5itoUV5JJDPreP

Please review the same and advise how to resolve this issue.

Thanks.

[urbanmonkey]

Dear bulut,

Thanks for the quick response.
We are facing the same issue despite using the white toner as well. i.e. running a coat of white toner on the entire design after running the coloured coat. Still there is an issue with the colours sticking to the A-sheet.
Also, there is still the weird whiteness peeking through the designs.
What do you mean when you say Polymer toner? Does it have any negative consequences to the final output of the print?
The video you share has all the colours and brightness intact when transferred to the garment, however that is not the case when we are doing it. Please advise a solution for the same.

[Author]

Posts