Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
In RIP software step one: choose Laser Dark Low Temp.
Settings stated on right side: Laser-Dark (No-Cut) LowTemp ES9420WT, Cotton: 200°C, 30 seconds, high pressure (5 bar)
On Forever youtube video and instructions in box A/B paper, it states 150-160degrees Celsius, 30 seconds and low pressure: 1-3 bar.
Which one is it? If RIP is wrong, please adjust all info in RIP.Good Afternoon @brodarto,
We are aware of this issue and it will be changed in the next TransferRIP update.
The correct setting is the same as it is written in on our website and our printing instructions:
Cotton Garments:
Temp: 150-160°C (300-320°F)
Time: 30 seconds
Pressure: 2-3 bar (29-43,5 PSI)
Viewing 2 posts - 1 through 2 (of 2 total)
- The topic ‘RIP step-1 profiles’ is closed to new replies.
