Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #14882
    sapo sapo
    Participant

    Hello

    I purchase some FOREVER Laser-Dark (No-Cut) LowTemp and using a Cannon LBP621 with White Toner Ghost.
    I tried to print but every time I print with the A sheet the edges seem to have some bleeding of colour. Anybody know how I can sort this out? It doesn’t happen when I do in normal paper.

    Images below:
    https://www.dropbox.com/sh/6ti6txdm3o8tk71/AAAM7XSxnLivK9ixigeY8WCia?dl=0

    #14885
    a.messina
    Moderator

    Hello sapo sapo,

    this seems like a problem of the “double-pass” printing with the GHOST technology.
    It seems like the white toner is not only on the design but also around it…
    to check whether this assumption is wrong or is pointing in the correct direction, please check whether the B-Paper is loosing some of its “glue” where no part of th design is.
    If the B-Paper is affected looses adhesive in places where there is no toner in your design, then the toner comes from the printing with the printer.
    if not please report how the B-paper looks.

    BR
    FOREVER tech-support team

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.