Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #11690



    I was just wondering if you could use laser light no-cut with ghost toner. Every time I see the ghost toner advertised it says to use laser dark. Is there an issue with the way ghost toner is printed through twice and therefore can’t be used with laser light, or is there no issue as long as the colors and white are printed in the correct order (and what would that be?) I know the process would be a bit different than the dark since it’s a 1 step process, so wanted to make sure it would work as well as what steps before I make a purchase. Thanks so much!


    FOREVER Support

    Dear adntigger710,

    we have no experience with the ghost toner ad Laser-Light (No-Cut).
    Laser-Dark (No-Cut) is working fine, so we think that Laser-Light (No-Cut) should also work fine. there shouldn’t be any problem by printing it twice (first colors then white).
    But we cannot guarantee that it works. The best would be to call GHOST and ask them. Nobody knows it better then they do.


Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.