Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #9957

    daveaturner
    Participant

    Hi,

    For the two paper waterslide process I am using an OKI Pro 9420WT and the Forever transfer RIP (using Laser Dark profile as there isn’t a profile for Waterslide). When printing the A foil should I be using the ‘Transparency’ paper setting as I would for Laser Dark or should I use the ‘Labels 1’ setting as stated on your printing instructions for Waterslide? Also what should I set the white spot channel percentage to?

    Kind regards

    Dave t

    #9958

    FOREVER Support
    Moderator

    Dear Dave,

    if you want to use the 2 Paper option for Waterslide you need our old A-Paper and not the A-Foil. With the A-Foil it won’t work.

    BR

    #9967

    daveaturner
    Participant

    Hi,

    That explains everything. I’ll speak to my supplier

    May thanks for you advice

    Dave t

Viewing 3 posts - 1 through 3 (of 3 total)

The topic ‘What paper setting should I use for 2 paper white toner process?’ is closed to new replies.