Multiplicate Spot By (Manual, page 24)

[Georgiy Kuzmin]

Hello!

In the Manual and in Online Wiki there is the following bar graph: http://systemata.synology.me/dokuwiki/doku.php?id=en:ns_sys_transfer-rip:weissauftrag_bestimmen

I can’t uderstand why o the secon bar with 30% cyan there is 100% of White only. If the “Fillup White up to” is 200% and the cyan is 30% and the “Multiplicate White by” is 1.00 there must be 170% of White to ahieve 200% fillup. Explain, please.

Thanks in advance!

[Anonymous]

Dear Georgiy Kuzmin,

the printer is not able to print more than 100% of each color. This is the reason why you can’t reach more than 130% in that example.

[Author]

Posts