Laser-Dark (No-Cut) LowTemp HOT STAMPING FOIL (Finishing)

Achieve amazing colors and outstanding wash resistance without Cutting and Weeding!


More than 51 different colors.

Printable Materials

  • Cotton
  • Polyester
  • Mixed Fabric
  • Nylon
  • Silk
  • Leather
  • Denim
  • Paper
  • Bookcovers
  • Wood
  • Metal
  • and many more…

Weight & Sizes

  • 136 g/m
  • 30cm x 12m
  • 11,8″ x 472,4″


  • No Cutting – No Weeding
  • Very Soft Touch
  • High Washability
  • Vibrant, Brilliant Colours

Hot Stamping Foils

Until now, the finishing of textiles with Metallic Foils could only be achieved with a standard Flex or Flock material and had limited options. Only large logos and lettering could be plotted and transferred.

FOREVER Laser Dark (No-Cut) LowTemp transfer media can be easily Metalized, with the advantage that even the finest details can be transferred.

In the first step, a single colour design will be transferred with the A-Foil FINISHING onto the fabric. The application is identical to the normal Laser-Dark (No-Cut) LowTemp application. With an additional step in the design process metallized designs are achieved by using the Hot Stamping Foil.

With a choice of 51 different Hot Stamping Foils, detailed or even rasterized designs (see TransferRIP) can be easily decorated. The typical limitations of the heat transfer process with Flex and Flock are now a thing of the past!


51 Hot Stamping Foil Colors:



Laser-Dark (No-Cut) LowTemp A-Foil

This is the transfer media on which you print your image. The transparent material has a special top-coating that protects the toner. This improves durability and washability, even when applied at lower transfer temperatures (150 – 160 °C / 300 – 320°F).

No more guessing where the transfer is applied! The transparent foil gives precise placement on your garment.



The B-Paper was developed specifically for the A-Foil. It is finely tuned to ensure optimal processing.

The special coating of the B-Paper develops it’s adhesive power starting at 100°C / 212°F, allowing a variety of different materials or surfaces to be transfer printed.



Preparation of the Transfer:

  • Print your design using only BLACK TONER (4-color-black*).
  • Press with B-Paper (See Hot Stamping Foil Instructions).
  • Separate the A-Foil from the B-Paper while HOT, in a Slow, Low & Fluid Motion.
  • Cut around your transfer to remove the coating frame.

Application: Transfer to Textile

  • Place the transfer on your textile.
  • Press together (See Hot Stamping Foil Instructions).
  • Wait until the textile has completely cooled down, BEFORE removing the A-Foil FINISHING!

Application: Applying the Hot Stamping Foil

  • Place the desired sheet of Hot Stamping Foil on your design, cover it with a sheet of Matte Finish Economy.
  • Press together (See Hot Stamping Foil Instructions).
  • Wait until the Hot Stamping Foil has completely cooled down, BEFORE removing.
  • Wash resistant up to 40°C (Cold Wash Cycle).
  • TIP: Use a textile to rub over the finished design to remove leftover particles of the Hot Stamping Foil!

*4-Color-Black consists of 100% Cyan, 100% Magenta, 100% Yellow and 100% White and it‘s the perfect base for Hot Stamping Foils!