Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Laser light not transferring #11701
    rudyji@wanadoo.fr
    Participant

    i send photos to your mail : info@forever-ots.com

    in reply to: Laser light not transferring #11700
    rudyji@wanadoo.fr
    Participant

    my heat press is a secabo clam 5 bought new one week ago.

    in reply to: Laser light not transferring #11699
    rudyji@wanadoo.fr
    Participant

    I print with oki es 7411 wt, i use transfert rip, fillup spot up to 250% white coverage , multiple 1, i set micro mask, mask 25.
    I found that the clear colors ( yellow, clear cyan, light pink…) transfert better on the fabric when i fill up spot up to 250 % whithe coverage (in transfert rip), otherwise this light colors don’t transfert at all .
    regard,

    in reply to: Laser light not transferring #11698
    rudyji@wanadoo.fr
    Participant

    Hi,
    like i say before, i process with different temperature and pressure and time. to peel of , i processed like in the video and from instructions on notice which provided with the transfert;
    i preheat the down plate for 40 seconds, i press at 195° c for 30 s with hight pressure, i wipe the paper for 5 to 10 seconds and peel of on the plate of plate smoothy and gently, on part of design stay on the paper, i re press for 30 seconds with silicon paper and after that i can easily remove the toner from the t shirt when i scratch it with my nail, like the toner doesn”t stick correctly to the fabric, i use t shirt B and C 100% coton but i also tried with others t shirt like fruit on the loom , roly, sol’s and it’s the same story.
    HOW TO JOIN PHOTOS TO THE MESSAGE ???

    regards.

    in reply to: Laser light not transferring #11696
    rudyji@wanadoo.fr
    Participant

    hi,
    my expérience with laser paper forever light is very bad, i tried so many ways and waste so many paper and t-shirt.
    I played with the time , the pressure, the temperature, the peel off and at least i got only shit and waste money and time, and when i almost get a correct result (not a full succes) and i repeat on same way the process, the result is hugly, i mean the resutl is not regular, how can i do a business with that ???? , i can’t understand how they manage to do it in the many videos we can find on the net.

Viewing 5 posts - 1 through 5 (of 5 total)